| |
| RS08 BG2 | | | Working Pressure:
Pmax 40 MPa (400 bar)
Bursting Pressure:
Pconnected 2250 bar
PFemale body 1150 bar
P Male tip 500 bar
With standard threaded connections, the working pressure is determined by the highest permissible rated pressure. | | | |  | | | | | | |
|
|
| Port A | Tube Ø D2 | L1 | L2 | L3 | L4 | Female body Part No. | Weight | Male tip Part No. | Weight |
|---|
| Female thread DIN 3852 | | M16x1,5 | | 64 | 60 | | | RS08-1-IMF16* | 205 | RS08-2-IMF16* | 300 | | Male stud with type W bore (24°) to DIN 3861 | | M14x1,5 | 8L | 54 | 60 | 10 | | RS08-1-L0814 | 210 | RS08-2-L0814 | 305 | | M16x1,5 | 10L | 55 | 61 | 11 | | RS08-1-L1016 | 210 | RS08-2-L1016 | 305 | | M18x1,5 | 12L | 55 | 61 | 11 | | RS08-1-L1218 | 210 | RS08-2-L1218 | 305 | | M22x1,5 | 15L | 56 | 64 | 12 | | RS08-1-L1522 | 210 | RS08-2-L1522 | 305 | | M18x1,5 | 10S | 56 | 62 | 12 | | RS08-1-S1018 | 215 | RS08-2-S1018 | 315 | | M20x1,5 | 12S | 56 | 62 | 12 | | RS08-1-S1220 | 222 | RS08-2-S1220 | 315 | | M22x1,5 | 14S | 58 | 64 | 14 | | RS08-1-S1422 | 230 | RS08-2-S1422 | 320 | | M24x1,5 | 16S | 58 | 64 | 14 | | RS08-1-S1624* | 230 | RS08-2-S1624* | 320 |
|
| RS08 BG 2 | | | Dust cover body
The dust guard is used to protect the carrier half against pollution.
It is produced of black plastic. The cap can be delivered optional with a drill hole for a marking clip.
You will find this clips in accessories. | | | |  | | | | | | |
|
|
Part No.
| Without bore | With bore |
|---|
| RS08-7-SW001A1 | RS08-7-SW001C1 |
|
Dimensions in mm / Weight in g / Subject to change
*available on request |
